发光铱(Ⅲ)配合物抗肿瘤活性研究及应用

铱(Ⅲ)配合物因其发光量子产率高且波长易调控、发光寿命长和光稳定性好的特点,在发光材料领域备受关注。铱(Ⅲ)配合物细胞渗透能力强,能靶向多种细胞组织并影响其结构和功能,表现出独特的抗肿瘤活性,是目前金属抗肿瘤药物特别是PDT光敏剂方向的研究热点。本文重点关注铱(Ⅲ)配合物的结构对其发光性能与抗肿瘤性能的影响,综述了近期铱(Ⅲ)配合物在生物成像、探针与传感、抗肿瘤诊疗等领域的研究进展,并对目前研究中存在的问题及其应用前景进行探讨和展望。     

Ultrasonics as a tool for development of pine-needle extract loaded bee wax edible packaging for value addition of Himalayan cheese

In the present study, Himalayan cheese, kradi was coated with beeswax loaded with pine needle extract (PNE) to increase its shelf life and nutraceutical potential. PNE was extracted via ultrasonication and incorporated into beeswax at concentrations, 2:1, 1:1, and 2:3 (grams of beeswax to mL of PNE). The dispersion of PNE in the coatings was carried out using an ultrasonic probe at a frequency of 20 kHz for 15 min and at power rating of 500 W. The coatings were characterised using scanning electron microscopy, light microscopy, dynamic light scattering (DLS), fourier transmission infrared spectroscopy. DLS revealed a hydrodynamic diameter and zeta potential of 12.11 ± 0.41 µm and −19.32 ± 0.61 mV for coating loaded with highest concentration of PNE. The bioactivities of the coating including antioxidant, antidiabetic and antibacterial assays revealed significantly higher values with the increase in PNE concentration. Shelf life and sensory evaluation study including microbiological and sensory analysis revealed inhibition of mould growth and good score of texture and appearance with the increase in concentration of PNE. The study provides a future perspective for application of beeswax loaded PNE coatings in cheese industry.     

(Sm0.5Gd0.2Nd0.3)2(Hf0.3Ce0.7)2O7复合氧化物的热物理性能

为寻求新型热障涂层用陶瓷材料,本文采用高温固相烧结法制备了(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。利用XRD分析了其晶体结构,SEM分析其显微组织,膨胀仪测试其热膨胀性能,激光热导仪测试其热扩散系数。结果表明,成功制备了具有单一萤石晶体结构的(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。其显微组织结构致密,晶界清晰无其他相存在。由于复杂的元素组成和较大的原子量,其热导率明显低于7YSZ和Sm₂Ce₂O₇。其较低的热膨胀系数则归因于B位离子较小的离子半径,但其热膨胀系数依然满足热障涂层的要求。     

Excited-State Dynamics of Non-Luminescent and Luminescent π-Radicals

Recently, the potential use of organic π-radicals and related spin systems has been expanded to modern technological applications. The unique excited-state dynamics of organic π-radicals can be useful to improve the stability of photochemically unstable organic compounds, make the polarization transfer applicable to information technology, and achieve effective up-conversion of interest for luminescence bioimaging, among others. Furthermore, highly luminescent stable π-radicals have been recently reported, which are especially interesting for application in organic light-emitting devices owing to their potential to provide an internal quantum efficiency of 100 %. Thus, the excited-state nature of stable π-radicals as well as the control of their excited-state spin dynamics are emerging topics both in terms of fundamental science and related technological applications. In this minireview, we focus on the excited-state dynamics of both photostable non(weakly)-luminescent and luminescent π-radicals, which are opposites of each other. In particular, we cover the following topics: 1) effective generation of high-spin photoexcited states and control of the excited-state dynamics by using non-luminescent π-radicals, 2) unique excited-state dynamics of luminescent π-radicals and radical excimers, and 3) applications utilizing excited-state dynamics of π-radicals.     

A stable pillared metal–organic framework constructed by H4TCPP ligand as luminescent sensor for selective detection of TNP and Fe3+ ions

A novel luminescent metal–organic framework ( Zn‐TCPP/BPY ) with pillared structure based on 2,3,5,6‐tetrakis(4‐carboxyphenyl)pyrazine (H₄TCPP) and 4,4′‐bipyridine (BPY) has been designed and synthesized through a solvothermal reaction. The [Zn₂(COO)₄] paddlewheel units are linked by TCPP^4? ligands to form two‐dimensional layers and further connected by BPY ligands as pillars to construct the twofold interpenetrating three‐dimensional framework. Interestingly, Zn‐TCPP/BPY possesses outstanding stability in organic solvents and water as well as maintains its structural rigidity in aqueous solutions of different pH values (3–12). After activation, Zn‐TCPP/BPY possesses permanent porosity with Brunauer–Emmett–Teller surface area of 630 m² g^–1. Remarkably, Zn‐TCPP/BPY displays excellent fluorescent property in virtue of the aggregation‐induced emission effect of the H₄TCPP ligand, which can be highly active and quenched by small amounts of 2,4,6‐trinitrophenol (TNP) and Fe³⁺ ions. Furthermore, the detection effect of Zn‐TCPP/BPY remains basically the same even after five cycles. The excellent stability, high sensitivity, and recyclability of Zn‐TCPP/BPY make it an outstanding chemical sensor for detecting TNP and Fe³⁺ ions.     

Slippery liquid-infused porous surface via thermally induced phase separation for enhanced corrosion protection

Slippery liquid-infused porous surface (SLIPS) is a rising star in corrosion protection owing to its outstanding corrosive medium resistance and self-healing property. The large-area and facile fabrication of SLIPS remains a challenge lying on the way of its practical application. Herein, we develop a novel SLIPS based on a porous polyvinylidene fluoride (PVDF) substrate fabricated by thermally induced phase separation. A sphere-packing structure can be easily obtained by blade-coating followed by cooling. The SLIPS exhibits an extremely low sliding angle of 5.8° so that it can resist the fouling of even the Chinese ink, ascribing to its slippery dynamic surface with low surface energy. We also evaluated the anti-corrosion performance of the SLIPS and superhydrophobic PVDF coating by electrochemical impedance spectroscopy (EIS) and scanning Kelvin probe technique (SKP), both of which exhibited enhanced corrosion resistance in 3.5 wt% NaCl solution due to the physical oil and air barriers against the corrosive medium penetration. Nevertheless, the SLIPS coatings performed outstanding self-healing properties because of the high fluidity of infused oil to recover the surface damages, and the self-healing process was recorded by the SKP.     

Compaction of nanosilicon pellets and sol-deposited films via high-vacuum annealing

1. Download : Download high-res image (121KB)
2. Download : Download full-size image

     

On the use of AES data analysis to determine local enrichments of conversion coating elements at intermetallic particles on rolled Al

In this paper, the behaviour of the industrial applied Ti/Zr conversion coating (CC) pretreatment on rolled automotive aluminium samples (AA5182) is analysed. Due to its nanometre lateral and depth resolution, Auger electron spectroscopy (AES) is used to analyse the CC distribution at surface cathodic intermetallic particles. As a result of its high surface sensitivity, the AES technique is very susceptible to differences in the top contamination layer thickness. It is demonstrated that AES point measurements performed on aluminium model samples coated with 1.5 and 3 nm of Ti (oxide) layer cannot differentiate the two-layer thicknesses if a difference in the top contamination thickness is not taken into account. A data analysis methodology is introduced, based on the ratio of normalized peak areas (enrichment ratios), to eliminate the effect of the contamination layer thickness. The experimental validation of the methodology is performed on the model samples, demonstrating errors of 2% on the enrichment ratios on similar samples with different contamination layer thicknesses, while the conventional spectra quantification results in errors of 49%. The methodology is also theoretically substantiated within certain constraints. By the use of the AES methodology, an enriched Ti and Zr deposition is confirmed at the cathodic intermetallic particles at the surface of the industrial no-rinse CC sprayed automotive aluminium sheet samples.     

Analysis and fate of the hindered amine light stabilizer Tinuvin 622 in polyester powder coatings using high performance liquid chromatography / time of flight mass spectrometry

Hindered amine light stabilizers are used to protect polymers from heat- and light-induced degradation. In this study the oligomeric stabilizer Tinuvin 622 was analysed in-depth employing high performance liquid chromatography/time of flight mass spectrometry (HPLC/TOF-MS) to differentiate products of different manufacturers in respect of their terminating groups and oligomer length. Additionally, the behaviour of the stabilizer in uncured and cured polyester powder coatings was investigated regarding its interaction with the other coating components and chemical changes during the crosslinking process. The extraction efficiency was determined as a function of oligomer length and coating colour.